CZONE MASTERBUS BRIDGE INTERFACE
Protect your electronics from being
damaged by harmful high voltage spikes.
When fitted to the battery supply, these
modules look for sudden increases in
voltage then switch into protection mode
to absorb and suppress the high energy
12 V DC
24 V DC
Heavy Duty Current Transformer
Max. current 150 A AC.
CT-HD is available for systems with
large mains cables, too large for
CT-10-3 (order separately).
Dim.: Ø 47 x 10.5 mm / 1.85 x 0.4 inch.
Hole size: 32 mm / 1.25 inch.
For isolating sections of a NMEA 2000
network to decrease standby current
draw. Isolation when bridging between
two CAN networks, (e.g. connecting
CZone to Simrad Simnet). For expansion
of the NMEA 2000 network when the
maximum node limit for the network
has been reached
(node = any device
connected to the NMEA 2000 network)
Once fitted, 40 additional nodes
can be added.
CZone MasterBus Bridge Interface
The CZone MasterBus Bridge Interface physically connects
the MasterBus and CZone networks together, enabling the
two networks to communicate and act as one. This provides
seamless control and monitoring of Mastervolt power
electronics from CZone displays or partner products.
Control of Mastervolt inverters and
chargers from CZone displays, switches
or partner products.
Display MasterBus acquired systems
information such as tank and power
levels on CZone displays.
Transfer of alarms between both
69 x 69 x 50 mm
2.7 x 2.7 x 2 inch
145 g / 0.32 lb
MasterBus cable adapter,
Please contact Mastervolt or your local dealer for possibilities in your specific application.