close

close
Home / Charge & Convert / DC-DC Converters /Mac Plus series / Mac Plus 24/12-50 + CZone

Mac Plus 24/12-50 + CZone

Boost Your Service Battery

Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to your service battery. And, by knowing when the engine is running and providing charge, you can be sure that the Mac Plus will never drain your starter battery.

Proven Mastervolt Quality

Get peace of mind, knowing that you’ve got the best on-board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even to completely flat batteries.

A robust design holds up in even the harshest conditions, with battery temperature optimized charging and high-quality aluminium housing to ensure superior protection against dust and water ingress. The power efficient design also allows the Mac Plus to operate silently and without a fan.

Total Power Flexibility

With a wide DC input range, the Mac Plus allows all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. And it also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive.

Parallel configuration of up to ten units will provide over 100 amperes. And advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa.

Analog voltage sense ports are also available to compensate for voltage drop and maintain proper charging.

Superior Monitoring & Control

Compatibility with CZone®, NMEA 2000® and MasterBus delivers truly superior monitoring and control, and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches.

Features

  • Fast and safe charging, even during short trips
  • Fanless design for silent operation
  • Suitable for flooded, Gel, AGM and Li-Ion batteries (incl. LiFePO4)
  • Even charges fully depleted batteries
  • Engine run detection protects starter battery
  • Adjustable current limits to meet Euro 5/6 requirements
  • Voltage stabilization protects sensitive equipment, lights and loads
  • Parallel operation to obtain charging capacities well over 100 Amps
  • MasterBus, CZone and NMEA 2000 compatible, for intelligent system monitoring and automation
  • Temperature compensation and voltage sense for an optimal charging result
  • E-Mark/R10 certification for mobile applications
  • Power supply mode offers stable power for sensitive loads
  • Heavy duty connections for easy installation and quick set up via DIP switches

Product code: 81205205
download pdf

Specifications

Specifications battery charger
Battery temperature sensor yes, included
Battery voltage sense yes
 
General specifications
Status indicator yes, 3-color LED
Communication protocol MasterBus, CZone & NMEA 2000
Output voltage 10-15 V
Nominal output voltage 12 V
Output voltage stabilisation 2 % at extremes of temperatures, load and input
Output voltage ripple (peak peak) max. 1 %
Max. output power 750 W
Nominal output power 710 W
Max. output current 50 A
Output charge current (3-step mode) 50 A
Nominal input voltage 24 V
Input voltage range 19-30 V
Max. input current 30 A
Galvanic isolation no
Voltage limited yes
Efficiency > 95 % (at nom. input voltage, full load); peak 97
Parallel configuration yes
Alarm contact yes, through MasterBus
MasterBus powering no
Engine run signal input yes (active high/active low)
DIP switches yes, for basic setup
Dimensions, hxwxd 255 x 165 x 66 mm
10.0 x 6.5 x 2.6 inch
Weight 2 kg
4.4 lb
Compliance CE, E-Mark, SAE J1171 & ISO 8846 Ignition Protected
 
Technical specifications
No-load consumption < 2 mA
Charge characteristic 3-step+
Battery types flooded, Gel, AGM, spiral, Lithium Ion, traction, user defined
3-Step charge option yes (DIP switch settings)
DC consumption < 5 mA
Connections 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 6-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on/off, temperature sensor, voltage measurement)
Temperature range (ambient temp.) -25 °C to 60 °C; derating > 40
Cooling natural cooling
Protection degree IP23
Protections overload, over temperature, DC short circuit, reversed polarity (fuse)
MasterBus compatible yes
 
 

Downloads

Brochures

Mac Plus 24/12-50 + CZone

New Products 2019

Download

Certificates

Mac Plus 24/12-50 + CZone

Type approval certificate (E-mark) Mac Plus series

Download

Certificates

Mac Plus 24/12-50 + CZone

RMRS Certificate DC DC Converters

Download

Certificates

Mac Plus 24/12-50 + CZone

EU DoC Mac Plus

Download

Certificates

Mac Plus 24/12-50 + CZone

UK DoC Mac Plus

Download

Drawings (dimensions)

Dimensions Mac Plus (DXF file)

Download

Drawings (dimensions)

Dimensions Mac Plus (PDF file)

Download

User manuals

Mac Plus 24/12-50 + CZone

User manual Mac Plus (CZone)

Download

3D product drawings

3D-drawing Mac Plus (zipped STEP file)

Download

Product image

Mac Plus 24/12-50 + CZone Small »
Medium »
Large »

Product image

Mac Plus 24/12-50 + CZone Small »
Medium »
Large »

Videos

Quick installation Guide for the Mac Plus series

Promotional video of the Mac Plus series

Accessories

Temperature sensor 6m

This temperature sensor is included with ChargeMaster (Plus), Mass Charger, CombiMaster, Mass Combi... View product

Temperature sensor 15m

Can be ordered separately. View product

EasyView 5

Waterproof System Monitor with 'daylight readable' display and intuitive touchscreenControlling... View product